Resources

Magnebond® CAB-200 is designed for the production of self-bonded, electromagnetic components, produced without impregnation. Bonding the coil is rapidly achieved in the production line resulting in higher productivity. Applications: Motors: fields and armature, dry type transformers and inductive coils.

Magnebond® CAB-200 is designed for the production of self-bonded, electromagnetic components, produced without impregnation. Bonding the coil is rapidly achieved in the production line resulting in higher productivity. Applications: Motors: fields and armature, dry type transformers and inductive coils.

Magnebond® CAR-200 is designed for the production of self-bonded, electromagnetic components, produced without impregnation. Bonding the coil is rapidly achieved in the production line, resulting in increased productivity.

Applications:

- motors: fields and armatures

- many application in the automotive industry, as well as other areas which may experience high levels of chemical contact.

Magnebond® FX-120 is designed for the production of self-bonded, transformer coils with high mechanical strength. Bonding of the coil is achieved during the vapour phase drying process.

Magnebond® FX2-120 is designed for the production of self-bonded, transformer coils with high mechanical strength. Bonding of the coil is achieved during drying process

Magnebond® UL-180 is designed for the production of self-bonded windings, produced without supporting bobbins and without impregnation, but by either moulding or pressure. It is recommended for windings which need a good compromise between solderability and bonding. Bonding the coil is rapidly achieved in the production line resulting in higher productivity. 

Applications:

- Deflection Yokes for Monitors

- Electrical Motors

- Solenoids.

Magneform® F-120 & FN-120 datasheet for oil-filled and dry-type transformers, designed for class A and E electrical coils.

Magnesol® E-180 is designed for the production of following applications:

- High-speed windings and automatic processes

- Windings that experience severe heat overloads

- Micro-motors

- Relays

- Solenoid valves

- Transformers

- Fine and ultra-fine windings

Magnesol® U-155 is recommended for the following applications:

- Connection without stripping

- Automatic connection in solder bath at 390°C

- Automatic processes

- Use of twisting devices. 

Main uses are found in relays, transformers, television and car components as well as the telecommunication technology, the construction of micro motors, low range motors and measure apparatus.